top of page
Grass

HUSQVARNA ROBOT AUTOMOWER INSTALLATION

HUSQVARNA INSTALLATION PROCESS

SITE ASSESSMENT

The first step in installing your Automower is to assess your lawn and determine the best location for the charging station. We'll make sure to choose a flat area that is easily accessible, preferably near an electrical outlet. We'll take into consideration any obstacles such as trees, flower beds, or slopes in your lawn that might affect the mowing process.

BOUNDARY WIRE INSTALLATION

Once a location for your charging station has been chosen, it's time to install the boundary wire. This wire acts as a virtual fence, guiding your Automower to stay within the designated mowing area. Pegs and staples are used to secure the wire in place and connect it to the charging station.

GUIDE WIRE SETUP

If you have any narrow passages or separated areas in your lawn, guide wires can be used to ensure your Automower navigates through them safely. These wires are installed parallel to the boundary wire and help guide the mower through tight spaces.

AUTOMOWER PROGRAMMING

Once the physical installation is complete, we'll program your Automower according to your lawn's size and mowing needs. We'll adjust settings such as cutting height, mowing schedule, and sensitivity levels for obstacles.

TEST RUN & TROUBLESHOOTING

Before letting your Automower roam freely, we'll do a test run to make sure everything is working as expected. We'll keep an eye on its movements and adjust settings if necessary.

Automower Install & Setup
Blue Pattern

Give Us A Call or Text With Any Questions!

bottom of page